PDA

View Full Version : Palmers Nasty Hurricane


Shortjak
04-13-2009, 01:31 AM
how would i modify 2 98 customs into a double-barrel much like a palmers nasty hurricane? any ideas?

Epic_Scotsman
04-13-2009, 08:38 AM
easiest would be to grind down the trigger frames leaving the trigger still mounted. The add a linkage salveing the two triggers together then amke your own trigger frame(or take something elses) and make a mount so it attaches to the beat and actuates the linkage binding the two triggers.

Rico
04-13-2009, 08:43 AM
http://www.rpconline.com/catalog/content/images/tape_duct.jpg


But seriously Spec Ops made a bracket to attach two A5's together like that with a crank switch to fire them both.
SO A5 Hammer. Might want to look into how they made the bracket.
http://farm1.static.flickr.com/123/322360679_d0881beb62.jpg?v=0

imported_Reject
04-13-2009, 08:53 AM
looks just like 1 plate between the ASA part of the grip and where foregrip handle was, with holes drilled in the asa plate to hold the asa's

Epic_Scotsman
04-13-2009, 09:08 AM
that wouldn't be like a nasty hurricane as it still has two trigger frames

Epic_Scotsman
04-13-2009, 09:09 AM
that would not be like a nasty hurricane as it would still have two trigger frames

Shifter
04-13-2009, 10:42 AM
To anyone who dosnt know what a Nasty Hurricane is.

http://www.palmer-pursuit.com/images/guns/Nasty-Hurr-blackstock.JPG

Chris_L
04-13-2009, 12:14 PM
ive always been a fan of this style.

http://www.docsmachine.com/veetwinmain2.jpg

Flanker
04-13-2009, 09:23 PM
That is beutiful :cry:

Shortjak
04-13-2009, 09:36 PM
thats a nasty typhoon i prefere the asa hookup styler of the hurricane and such and i know what a hammer is thats not what im looking to do sorry i want a double barreled paintball gun not 2 gats ducttaped together lol:P

ravenlord
04-13-2009, 09:51 PM
Ummm, ya that first image is a Hurricane... Trust me on this one...

Shortjak
04-13-2009, 11:14 PM
man i have to be specific when yer around....the pic that chris L posted was of a typhonn the one that Shifter posted is a hurricane that is the setup i like wondering how to make that

ravenlord
04-14-2009, 11:10 AM
The second is a custom 2 barreled cocker more then likely built by Doc :P, I had to....

I think that the simplest way to make a hurricane is to pick a gun system that is easy to link together, easy to put side by side, and very simple to mount in a stock. That pretty much narrows it down to Automags, and Ions. Both will cost around 100 for a simple stock one, but I think that the Ion would be an easier one to mount. Though the mag would be more reliable and you would enjoy it more. You're going to have to make a custom mounting system and trigger frame either way. The mag would either be mechanical or Pneumag. Mechanical being simpler, pneumag being far more awesome. The Ion would need to be electro, which can be both easier and a larger pain depending on how good you are with electronics.

The stock will have to be custom built, and custom fitted to the system you chose to use. Custom built because I don't think that there is a stock on the marker that is wide enough to fit 2 paintball gun bodies side by side. Also with a custom stock you can make it look however you wish.

The other larger trouble that you're going to encounter is the air load you're going to need to power this beast. CO2 is both lighter and can power something for far more shots then an Air tank can, but an Air tank can run a wider variety of guns far better. Air tanks are bulkier, and unfortunately unless you have a massive 92+ tanks your not going to get many more then 400 or so shots out of the nasty. that is still 800 balls in the air, but its still not that many "shots".

That's the advice that I can give, whether it is helpful or a rain on your parade I don't know.

Epic_Scotsman
04-14-2009, 11:16 AM
Ravenlord hit it on the head

Shortjak
04-14-2009, 04:30 PM
ok thanx but i still dont understand how to make 1 body shoot 2 barrels....

ravenlord
04-14-2009, 04:38 PM
If you have 2 mag valves you can hook the sears together so that when you pull the trigger both of them more and shoot both barrels at the same time. As for most of the brass Hurricanes and Typhoons, they all run off of the same trigger mech, and there is a third tube below the top two that houses the valve and hammer. It supplies both barrels.

Chris_L
04-14-2009, 08:09 PM
yeah its not that you are making one valve shoot two barrels, its that you want 1 trigger to shoot 2 valves.

Personally i like the idea of using ions. they are so dirt cheap and easy to work with. plus since they are electronic all you have to do is rewire it so both noids are attached to the same board.

andredaigle
04-14-2009, 11:30 PM
hey stan, think you could build me an e-typhoon?

ravenlord
04-14-2009, 11:37 PM
PPS makes the Typhoon, it is a semi automatic version of the Sheridan P68. The Nasty Typhoon is a 2 barreled Version of the Typhoon. In order for something to be a typhoon it has to be made of brass using a Sheridan valve system.

A Nasty cocker would be a bit of a pain to make, seeing as there are fewer Nasty cocker bodies then there are 100% stock Mechanical Eclipse, none drilled for eyes cockers.

andredaigle
04-15-2009, 06:19 PM
i beleive they are cockers...

http://www.youtube.com/watch?v=PiEEegIO ... re=related (http://www.youtube.com/watch?v=PiEEegIOJL4&feature=related)
http://www.youtube.com/watch?v=626ot_wg ... re=related (http://www.youtube.com/watch?v=626ot_wgKhQ&feature=related)

ravenlord
04-15-2009, 06:30 PM
Yes, they have an autococking design. As does an Autococker, a Blazer as well as anything that has been converted from a pump based marker into a semi automatic design using a 3way, ram and LPR.

They share a lot in common, but they are different. I could call an Ego a timmy because they operate on pretty much the same design, but I would be horribly wrong. Same deal here.

Also the Typhoon came first...

andredaigle
04-15-2009, 06:46 PM
ah thanks for info! but as you see in second video, he did fit a type of cocker frame on there, and was cycling at 25bps!(errr 50 :P )

ravenlord
04-15-2009, 06:49 PM
They work off the same principal. Odds are he just wired an eclipse eblade frame onto the Typhoon. If they take the same frame as the Blazer does then an eblade shouldn't be much more then a few bolts and a few wires.

andredaigle
04-15-2009, 06:53 PM
either way it would be sick to take that on the fields hehe.

ravenlord
04-15-2009, 07:01 PM
Man, I would be happy with just a getting a Nasty anything out onto the field. Too bad they eat Air faster then a '69 muscle car eats gas.

andredaigle
04-15-2009, 07:03 PM
well i guess since you gotta double everything else might as well get one of them 90cu tanks lmao

Stan
04-15-2009, 07:14 PM
Ive always been gay for the nasty puggs. Damn that would be mad max.