Need the oppinion of the best people on earth. Pump players.

[Dunfee]

Ok, I'm going out on a limb here and selling quite a few pieces of gear to get a CCM T2.

I come to you folks to help me decide on my color scheme.

I dont want it to be too flashy but I want people to look at it and drool about how sexy it is.

I really like the following one but I dont know if I want the green or a different color.
http://www.pbnation.com/showthread.php?p=61883894#post61883894

Browse the thread, help me decide. I'll let the winner fire a few shots through it when it shows up.

Help me appg, you're my only hope.


Ps. any of you interrested in a Angel A1 or a TPX take a look at my threads in the markers section

[ravenlord]

That my friend is one sexy piece of T2. I really like the green. However black and red is usually a good bet, and I personally would go with purple and black.

[Epic_Scotsman]

second on the red and black

[Tankman77]

I like the green and black one but the purple one is sexy also.

[Dunfee]

I really liked the black/purple but I loved the dust black with polished green bits. I think I'm going to go dust black with polished green on the pump plate, autotrigger plate, back block, back plate and the upper part of the feedneck and the upper half of the reg. so basically the same colors from my link on the parts hilighted on the T2 on page 11

[Pumpie]

I really liked the black/purple but I loved the dust black with polished green bits. I think I'm going to go dust black with polished green on the pump plate, autotrigger plate, back block, back plate and the upper part of the feedneck and the upper half of the reg. so basically the same colors from my link on the parts hilighted on the T2 on page 11


good choice ! what i would have gone with.

[Graf Orlock]

I ended up with a dust black one and i am happy with it.... i originally wanted dust black and green but they where having problems getting a consistent green colour from there anno guys (this issue has been solved) so i opted for a straight dust black one jsut to get it here sooner!

[Dunfee]

yeah, I've been told that it would be at least 6 weeks wait after my order. I think its worth the wait. I can still play with my phantom until then

[Dunfee]

Placed my order today.
Dust black with the following parts polished green:
pump plate
autotrigger plate
back block
upper part of the feedneck
upper half of the reg
Mini Rail above ASA
ASA On/Off nob

6 weeks... 6 weeks...

[ravenlord]

I am truely jealous.

[Baron]

Can't wait to see this at the field.

[Pumpie]

Pictures !!..well when you get it obviously.

[Dunfee]

CCM rep says my marker will be shipping this week. Hooray!

[ravenlord]

I am uber jealous. I wish I had the money to afford a new marker.

[Dunfee]

I am uber jealous. I wish I had the money to afford a new marker.

With my plans for this thing it will likely be the last marker I buy for a while. We'll see how long I actually get to hold it when I bring it to the field for the first time :P

[TheBull]

Placed my order today.
Dust black with the following parts polished green:
pump plate
autotrigger plate
back block
upper part of the feedneck
upper half of the reg
Mini Rail above ASA
ASA On/Off nob

6 weeks... 6 weeks...

Can't wait to see it in Action!!!!

[Dunfee]

*cough
http://img7.imageshack.us/img7/5553/dunfeecanada.jpg
cough*

[Epic_Scotsman]

very purty Dunfee

[ACP_Paddy]

very purty Dunfee

I second the motion...

No need for a barrel... looks great anyway!

[Aucoin]

Ryan, that is SICK.

[Pumpie]

glory that's nice

[TheBull]

*cough
http://img7.imageshack.us/img7/5553/dunfeecanada.jpg
cough*

All you need now is to get yourself a 50 round hopper & paint it lime green!!!!!
One good looking gun!

[Dunfee]

All you need now is to get yourself a 50 round hopper & paint it lime green!!!!!
One good looking gun!
I was thinking a rotor with green accents

[Pumpie]

I was thinking a rotor with green accents

I would go with a 50 because i see no point putting a electro hopper on a pump, unless its one of them electro pumps which aren't really pumps but just spacers with pump aesthetics

[Dunfee]

I would go with a 50 because i see no point putting a electro hopper on a pump, unless its one of them electro pumps which aren't really pumps but just spacers with pump aesthetics

I saw a T2 with a rotor on it (its one of the first two rows of results when you google image search CCM T2) and it looked pretty badass. I was thinking that picking one up with an accent kit would be my best bet. No doubt I'll rock the 50 at some point, but for now I'd like to know for sure there is a ball in the chamber every time I pull the trigger.

[Aucoin]

I would go with a 50 because i see no point putting a electro hopper on a pump, unless its one of them electro pumps which aren't really pumps but just spacers with pump aesthetics

Not really.

I seen a Karnivore with Mq2 valve and E2 frame. Still a pump, just better than an unregulated 'cut the spring to adjust your velocity' pump.

And as for hoppers, I'm with Ryan. I don't enjoy the 'shake and bake' method, and Rotors are very light.

[Pumpie]

Not really.

I seen a Karnivore with Mq2 valve and E2 frame. Still a pump, just better than an unregulated 'cut the spring to adjust your velocity' pump.

And as for hoppers, I'm with Ryan. I don't enjoy the 'shake and bake' method, and Rotors are very light.


Im not saying it will look bad but it just wont click in my head lol. makes sense though

[ACP_Paddy]

Puttin a 100L gas tank on a moped?

[Aucoin]

Puttin a 100L gas tank on a moped?

Nope. Mopeds arent cool, T2's are.

More like dropping a GSXR1000 engine into a Smart Car. Awesome ensues.

[ACP_Paddy]

I guess...

But you will never out shoot that little shake and bake.

[Aucoin]

I guess...

But you will never out shoot that little shake and bake.

Clearly you aren't lonely enough..


D:

[Dunfee]

Its ok. Stock class feed will most likely come sometime next season.

[Epic_Scotsman]

I guess...

But you will never out shoot that little shake and bake.

you'd be surprised with autotrigger

and as said before really depends on ow lonely he is lol

[ACP_Paddy]

This gun has no AT though right?

But yeah, if you have an AT, and small feed neck.

[Dunfee]

This gun has no AT though right?

But yeah, if you have an AT, and small feed neck.

The T2 does indeed have an AT

YouTube - CCM T2 Shooting Stream

[Aucoin]

Theres a lonely man, lol.

[Pumpie]

very nice. i would like to see some longer distance but heck that looks pretty nice, pump stroke smooth ?

[Dunfee]

I'll know soon. I asked CCM Chick on mcarterbrown to post a picture before it got shipped. It was posted last Wednesday so it should in the mail in no time

[M1SNIPER]

your pump happy or just not getting enough. LOL

[Dunfee]

Got it in the mail today. Cut the macro line too short but found what seems like a suitable replacement (no air left)
Just need some teflon tape and we're set

Pump stroke feels like butter. I can pump the friggin thing with one finger.

Unfortunately no pictures as of yet. My camera charge cable has been misplaced

[TheBull]

cut to short & charge camera cable? Come on bro don't make us wait!!!!

POST THE PICS!!!!!

LOL

Can't wait to see it in action!

[The Unforgiven]

Got it in the mail today. Cut the macro line too short but found what seems like a suitable replacement (no air left)
Just need some teflon tape and we're set

Pump stroke feels like butter. I can pump the friggin thing with one finger.

Unfortunately no pictures as of yet. My camera charge cable has been misplaced

massive fail, and you call yourself a maniac

[Dunfee]

massive fail, and you call yourself a maniac

Salvaged enough macro line off another gun. I'll need a little bit longer piece soon though. Next time I'm at the folks house I'm going to grab their camera, some teflon tape and throw a few 12 grams through the thing where I'm out of HPA

[The Unforgiven]

i live by you and have a full 68/3000 fill if you would like to borrow

[M1SNIPER]

i have macro line

[Dunfee]

i live by you and have a full 68/3000 fill if you would like to borrow

Just put a 12 gram cartrage through it and got 32 shots before it vented. Very nice. The thing is dead silent. I'll have to work on getting a matching barrel kit for it though, the .690 back I have is bound to cause a few roll outs

[TheBull]

Can't wait to see it! Any Pics coming?

[Dunfee]

As soon as I get paid so I can buy a new camera cable

[Dunfee]

Finally got a camera cable to charge my camera
http://img121.imageshack.us/img121/634/1000336.jpg
http://img20.imageshack.us/img20/4356/1000339r.jpg
http://img21.imageshack.us/img21/281/1000338r.jpg
http://img20.imageshack.us/img20/3032/1000336x.jpg

[M1SNIPER]

Sweet pump marker. I may have to break down and buy one.

[ACP_Paddy]

That small tank goes well with it too!

[Dunfee]

That small tank goes well with it too!

the tank is the perfect length I would say